Separated Porcelain Water Tank

Separated Porcelain Water Tank

  • Separated Porcelain Water Tank
Model No.: Separated Porcelain Water Tank

Product Description

Technical data for Porcelain enamel water tank
The place of installing the water heater must be closed to the place of using, the temperature / pressure relief valve, the machine of controlling temperature and electric heat pipe must be faced the direction of easy to maintain. The data plate should be easy to read, and the space above the water heater should be over the height of the water heater so as to check and change the positive pole protector.
The space around the water heater should be convenient when pulling down the whole water heater to maintain or change the parts in case of necessity.
The water heater, with three-dimensional type, must be installed in the level that can bear the weight of the product.
Power socket must be installed in the position that the water can`t spray, so as not to produce vapor when taking a shower, and make the socket leak electricity.
When heating, there is little water which discharge from the overflow outlet of the temperature/pressure relief valve. This is the normal phenomenon, and you should join a water pipe, the other end of water pipe causes to the safe place of discharging the water, so as not to scald.
The overflow outlet should be kept communicating with the atmosphere and down.
The Joining Of Pipeline:
If you want to learn more about our solar products.

Contact us today .
Skype: save.green.inc

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-3000 characters
Post Sourcing Request >>